Clean your Bar Cooler Condenser
Hi, I'm Hannah - I'm going to show you how to clean your bar cooler!
Cleaning your appliance will make it last longer, consume less energy and chill faster. Here is a step by step guide to the procedure. It takes about 15 minutes from start to finish.
1. Switch off the cooler
2. Unplug from the mains socket
3. Pull the unit out so that you can access the back plate
4. Unscrew the rear cover plate and remove
5. This will expose the condenser, compressor, fan motor and so on
6. Take a soft brush, or the head of a vacuum cleaner and remove all dust
7. Brush clean, being sure not to damage or bend this delicate component
8. Vacuum up any debris
9. Clean as much of the area as you can get at being careful not to damage any of the delicate componentry.
10. Never use water!
11. Put the rear cover plate back and replace the screws.
12. Put the socket back in
13. Switch back on.
It should look like this after you clean your bar cooler!
Enjoy the cool drinks and don't forget to do this again in three months time.